avrstudio 컴파일 에러..
MCU 및 PLD 2012. 1. 2. 22:54
Build started 28.12.2011 at 21:40:34
mmcu=atmega64 -Wall -gdwarf-2 -std=gnu99 -DF_CPU=8000000UL -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -MD -MP -MT main.o -MF dep/main.o.d -c ../main.c
/usr/bin/sh: -Wall: command not found
make: [main.o] Error 127 (ignored)
mmcu=atmega64 -Wl,-Map=TVLHD_2M.map main.o -o TVLHD_2M.elf
/usr/bin/sh: -Wl,-Map=TVLHD_2M.map: command not found
make: [TVLHD_2M.elf] Error 127 (ignored)
avr-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature TVLHD_2M.elf TVLHD_2M.hex
avr-objcopy: 'TVLHD_2M.elf': No such file
make: *** [TVLHD_2M.hex] Error 1
Build failed with 1 errors and 0 warnings...
mmcu=atmega64 -Wall -gdwarf-2 -std=gnu99 -DF_CPU=8000000UL -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -MD -MP -MT main.o -MF dep/main.o.d -c ../main.c
/usr/bin/sh: -Wall: command not found
make: [main.o] Error 127 (ignored)
mmcu=atmega64 -Wl,-Map=TVLHD_2M.map main.o -o TVLHD_2M.elf
/usr/bin/sh: -Wl,-Map=TVLHD_2M.map: command not found
make: [TVLHD_2M.elf] Error 127 (ignored)
avr-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature TVLHD_2M.elf TVLHD_2M.hex
avr-objcopy: 'TVLHD_2M.elf': No such file
make: *** [TVLHD_2M.hex] Error 1
Build failed with 1 errors and 0 warnings...
Help needed.
This seems to be something that the half-brains at Atmel have gone out of their way to ruin in Studio 4.19. Originally Studio had a mechanism where it would look for an find WinAVR if it was installed. Then Atmel started making a half-baked rip-off of WinAVR called "Toolchain" so they modified Studio so it would look for both (and annoyingly it found their crap in preference to WinAVR). It now appears in 4.19 (which is the latest) that they don't even try to look for WinAVR any more. This just shows how shorted sighted Atmel are. When you create a GCC project now you need to go to Project-Configuration Options then on the 5th tab ("Custom options") set the path to avr-gcc to be /winavr/bin/avr-gcc.exe and the path to "make" to be /winavr/utils/bin/make.exe and THEN you should be able to build OK.
